Wireless Headset Microphone

A USB microphone is a high quality microphones which simply plugs straight into your USB port — perfect for musicians on the move with laptops, but equally at home in the desktop music studio. Also a really good option with the iPad and other tablets. USB mics are compatible with both PC and Mac operating systems — they just plug and play so you can get started really quickly. They represent excellent value because there is no requirement to purchase any additional hardware, and are very easy to install and use. These are equally simple to set up and use in this way and will produce really good recording results. If you just want to make good quality recordings one track at a time, or if you are thinking about voiceovers for videos etc then you do not need to be so concerned about the headphone output and you may prefer the features and equipment of the larger USB studio mics.


It could be, but I had a broken hand microphone and no way to use my radio. Not only would I hook up a performance quality microphone to my HF radio, but I would get a few bonuses in the process. When connecting a non-radio microphone to a radio it is missing a key feature, the PTT switch. So as part of my plan I needed to devise a way to add that switch back in.

The choice was between a button on the desk or a footswitch. I actually chose both.

How to connect a microphone to a PC Computer or laptop and start making audio recordings is one of your most frequently asked questions. Nearly all computers have a mic port (nowadays often combined with a headphone port), so it should be possible to directly connect a dynamic mic if you have the appropriate jack for the socket.

Connecting a microphone to your computer If your computer has a microphone input port You’re all set. Just plug a compatible microphone into the microphone input port on your computer. What do we mean by compatible? Any microphone with a permanently attached cord that ends in a mini-plug should work. Note that many audio interfaces provide battery voltage for mono electret microphones on the ring of a stereo mini-plug.

Check your computer manual to be sure if this feature is provided. If it is, be sure to use a microphone that is designed to accommodate this. A mono mini-plug A stereo mini-plug A computer headset-mic combination is pretty much guaranteed to work. These microphones are not the highest quality, but can be had fairly inexpensively.

Using a USB Microphone with an iPad

Identifying the sound ports on your computer First of all you need to know the sound input capabilities of your computer. The rear of a typical PC The color-coded jacks on the sound card The pink port is normally the microphone input, and is usually mono but might be stereo. The light blue port is normally the line input port and is usually stereo. The green port is normally the headphone output port, also usually stereo.

Hello Amanda, While it is possible to connect a microphone, there are few different ways we can set them up. To provide you with the best answer, please let me know Sonos devices you currently have and which device you plan on plugging the microphone into.

Share on Facebook You’ve just purchased watt speakers capable of a gust-busting 91 decibels, backed by a watt four-channel amplifier. The only problem here is that you’re a bit lacking in the wiring department and want to make sure you’ve correctly put together these monster noise machines all for the sake of blowing your neighbors out of their lounge chairs. Hooking up speakers to an amp is simple. Speaker wire comes in various gauges, lengths, resistance and capacities.

Step Measure the distance from the amplifier to the speakers. If the speakers are close to the amplifier, say within 80 feet, gauge wire will do fine. If the speakers are further away, you need thicker wire to 14 gauge for better conductivity. Step Note the travel path of the speaker wire when measuring the distance from the amp to the speakers, say if you are running the wires down to the floor then back up to the speakers.

How to Make Sense out of the Mic Preamp Jungle

Various cables and connectors are used with PA systems to link all the equipment together. If the wrong cables or connectors are used, equipment may not operate correctly. In the worst-case, using the wrong cables or connectors could be dangerous, so be sure to understand which cables and connectors to use. Connectors often used with PA systems XLR connectors These connectors are frequently used in professional applications—which demand reliability—as they are compatible with the balanced method described later, are sturdy and resistant to deformation, and feature a locking mechanism so that cables will not disconnect even if pulled.

They are generally used with PA systems for microphones, power amplifiers, powered speakers, etc.

While Listen is checked, your microphone will be audible through your speakers, and in a more advanced facet, through stereo mix. So if you wanted to record your Mic and Stereo Mix, this is how you would do it, but at the expense of being able to still hear your mic (it throws most people off, like myself).

Windows 7 allows sounds picked up from your microphone to flow directly to your speakers, so you receive instant feedback from what you’re recording. As an example, if you were recording a training tutorial for your employees, you might want to hear your words as you say them to gauge quality. However, this method works considerably better if you connect a pair of headphones to your speaker’s headphone jack to prevent the sounds from feeding back into the microphone.

However, if you’re speaking into a directional microphone, reducing its sensitivity and keeping it away from your speakers will minimize feedback even when using speakers. Listen to the Microphone 1. In the Sound window on the Recording tab, find your microphone in the list of recording devices and double-click it. The default microphone is indicated by a check mark in a green circle.

Select the “Listen” tab and check “Listen to this device. Click the “Playback through this device” drop-down menu and select “Speakers Click “Apply” but do not close the properties window yet. Reduce Microphone Sensitivity 1. Select the “Levels” tab.

The Best GoPro Microphone

There are many factors that result microphone not working on your laptop, like broken drivers, incorrect microphone settings, hardware problems, etc. Check Microphone Driver on the PC Always remember to check the associated drivers on your PC firstly when you encounter any computer problems. Outdated microphone drivers are incompatible with the new-installed Windows system and will cause computer problems such as a no sound PC, a mute microphone, a recording fail , etc. So it is necessary to uninstall and reinstall the microphone driver, and sometimes you also need to update the sound card drivers to the latest version.

You could run Driver Talent on your PC to quickly reinstall as well as update all the drivers.

Adding a microphone and headset to your office computer turns it into a virtual conference center. These devices make it possible for you to conduct remote business meetings and place phone calls if you have the appropriate software installed.

You would need to connect that to the microphone input of the RasPi and devise some software to take the microphone signal and integrate it into the sound level envelope. You might as well just get a cheap electret microphone, such as Sparkfun’s , and use it directly in whatever circuit you put together. Analog logarithms are the way to go here One of the ground truths of modern, cheap ADCs, especially the ones provided on highly integrated systems, is that their dynamic range is limited by noise on the low end and the low supply voltage available on the high end.

Furthermore, taking your logarithms digitally makes poor use of the ADC bits you have available to you — small changes in signal at the low end cause a relatively large change in the log, but are hard for the ADC to distinguish due to its limited resolution. C1, C3, C4, and C6 provide supply decoupling of various sorts. Also, C3 should connected directly between pin 8 of U1 and the grounded end of C2 — this keeps current spikes from U1’s RMS-DC converter from messing up the rest of the circuit’s operation.

Finally, if you can’t get a LT , you’ll want to pay attention to the output swing — you need a part that can pull within a couple hundred mV or so of the negative rail, in addition to running off of a single 3. Rg dominates Rf when it comes to noise calculations , we are op-amp limited on noise here, albeit not by much. The resulting signal is a voltage swinging from nearly 0V to nearly 3.

How to hook up a condenser microphone to the PC?

Supercardioid Shotgun A microphone’s directionality or polar pattern indicates how sensitive it is to sounds arriving at different angles about its central axis. The polar patterns illustrated above represent the locus of points that produce the same signal level output in the microphone if a given sound pressure level SPL is generated from that point. How the physical body of the microphone is oriented relative to the diagrams depends on the microphone design.

For large-membrane microphones such as in the Oktava pictured above , the upward direction in the polar diagram is usually perpendicular to the microphone body, commonly known as “side fire” or “side address”. Some microphone designs combine several principles in creating the desired polar pattern. Omnidirectional[ edit ] An omnidirectional or nondirectional microphone’s response is generally considered to be a perfect sphere in three dimensions.

May 16, Author: Chris Pirillo Many of us rely on wireless microphone headsets to effortlessly interact with our media, but some people have a more direct approach. Rather than getting tangled and mangled in the cords and wires and alloys and compositions and things with… molecular structures of regular headsets and microphones, many opt for the wireless microphone headset as a way to be more mobile with less clutter and fuss. These people are often DJs — short for disc jockeys, so named for once spinning disks of vinyl on turntables to motivate a crowd of people into impromptu dancing, but now more often than not spinning laptop hard drives full of digital music for the same purpose.

You can find them in clubs, weddings, bar mitzvahs, and other events around the wide, wild world. Or they can just as often be conference speakers or tour guides or Madonna. Snap out of it! The big question here: The receiver may use mini XLR, 3. The good news is that they are all analog signals, so you can mix between them pretty simply.

If you were going from digital to analog, then this would be more tricky. Now you will have full control over the audio from your wireless microphone headset and your audience adoring preteen audience should love the fact that they can hear you without clamping their ears shut or having to strain to hear you.

Popular Topics

You can connect a “line-out” to a “line-in” and all will be well. A line-level input should be less vulnerable than a mic-level input though it isn’t designed for a headphone output expecting a ohm impedance. Designers of modern Macs and PCs probably make provision for end-users plugging inappropriate outputs into sensitive inputs Normally, each of the following audio interfaces are different and at least for quality reasons should not be mixed up line-in and line-out microphone in Each interface is electrically different.

Line-in is explicitly designed to be connected to line-out on a different device usually and vice versa.

What would you never throw out? Lady Wogan, because we’ve managed 44 years together and I think it would be ungrateful. What is your most embarrassing possession? In fact, I’m constantly thrilled by them, and I play them to myself every hour, on the hour, as a treat. Who was the last person to send you a text, and what did it say? Nobody ever texts me, because they know what I’m like. I’m a constant frustration to my children because I never switch my mobile phone on. I only use it when I need to make a call or when I’m stuck somewhere or lost, then I switch it off again.

I’ve never texted anyone in my life and I’m not sure I even know how to.

How to Hear Your Microphone Through Computer Speakers

Direct connection – Dynamic microphone: Also, connect the AMP connector from the DI to the bass amplifier, so that sound also comes out of the bass amplifier. When using an active type DI one which requires a power supply and batteries are not used, you will need to use phantom power. Turn the phantom power on in the same way as with the condenser microphone.

But now, anyone can produce a good quality recording on a simple home computer with a few hundred dollars worth of software. Better still, the Internet has provided a free channel for global music distribution — an opportunity well beyond the reach of the singer-songwriter or garage ban of yesteryear. According to the Los Angeles Times, over half the commercial recording studios in the L. Recording software like Avid Technology Inc.

Carr puts it this way: In this post, we turned to Shure Associate Gabe Benitez for an overview of the basics. Fundamental Considerations for Computer Recording The growing popularity of home studio recording consistently raises the question of interfacing professional microphones with computer sound cards. Unfortunately, sound cards are rarely designed for professional microphone use. In order to interface a microphone to any device, we have to consider the electrical and mechanical compatibility between them.

Signal level This is the actual voltage that comes out of a source or is needed by a receiving device, for example a sound card. Sound cards on the other hand require levels in the order of 10 millivolts ten times as much!

How to Use XLR Microphone on iPhone – Connect XLR Mic to iPad and Apple Devices

Hi! Would you like find a partner for sex? It is easy! Click here, free registration!